Herunterladen Inhalt Inhalt Diese Seite drucken

Initial Setup Operation - HeiTel CamTel SVR Schnellstartanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

HeiTel Digital Video GmbH -  Quick Installation Guide CamTel SVR

Initial setup operation

Online help
Port A configuration
Option
Network: Enable
TCP/IP
CAPI
2.0: Enable
CAPI 2.0
Network and
CAPI
2.0: Disable
TCP/IP and
CAPI 2.0
Modem: possible adjustment of 
parameters Port and Mode
Driver installation
Establishing the
connection to the
device
CamTel SVR
Installation of CamControl LITE
The  scope  of  delivery 
CamTel
SVR  includes  the  installation  CD.  Install 
commission the device.
To operate the software, the user requires read/write rights on the receiver
PC (administrator rights).
Using an installed Adobe Reader, there is a context-sensitive help available for
CamControl
LITE;  you  can  call  this  up  via  the  F1  key  or  using  the 
button. 
After 
starting 
CamControl
LITE  software,
it may be necessary to modify
the settings for Port
A. To do
this, select the Setup button
and in the Receiver options
dialogue  window  the  option
Port
A. Confirm the changes
made using OK.
Relevant changes:
Description
Enables TCP/IP connection (including USB direct connection) to the device
Enables CAPI (ISDN) connection to the device
Precondition for a null modem connection to the device
Port: defines the serial interface on your PC via which the null modem cable is 
connected with your device.
Mode: enables deactivation of the serial interface (OFF) or activation of the null modem 
functionality (Null
modem)
USB connection from CamControl LITE to the device
For a USB connection, if required the corresponding driver must be installed
on  your  receiver  PC.  The  driver  can  be  found  in  the 
program  directory,  sub-directory  \Drivers.  If  necessary,  please  consult  the
detailed  information  on  driver  installation  from  the 
software manual.
Start 
CamControl
LITE.  Click  on  the  Dial  button  and  in  the 
index dialogue window, select the entry USB Direct
a connection to the device using Dial.
Carry out the parameter settings for the device (see "Parameter settings for
the device" on page
21).
(see  "Included  in  delivery"  on  page
the
18)  for  your
CamControl
LITE  to
Help
CamControl LITE
CamControl LITE
Transmitter
Connection. Establish
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis