HeiTel Digital Video GmbH - Quick Installation Guide CamTel SVR
Quick Installation Guide CamTel SVR
Version
Publication date
Figures
Commissioning
Manual
Front view and description
Item
Labelling/description
1
Main power switch
2
LED Power - green
3
Pushbutton
Reset,
not labelled
4
V1 - V4 for
CamTel SVR 4
V1 - V10 for
CamTel SVR 10
LEDs - yellow
5
Pushbutton V out - black
6
LED Error - red
7
LED Online - blue
8
LED Live - blue
CamTel SVR
1
2
3
4
This quick installation guide describes the CamTel
and was created in March 2009. See the installation CD or our website
(www.heitel.com) for the current firmware version.
The figures used on this and the following pages relate in all cases to the
model option with ten video inputs. However, the quick installation guide is
valid for the models CamTel SVR 4 and CamTel SVR
Information on commissioning the device follows on page 19.
Detailed information, going beyond the scope of this quick installation guide,
can be found in the full device manual or the full software manual, both of
which can be found on the installation CD in PDF format.
Function
Switch On/Off
Power on indicator
Reset button for user-specific passwords and user names
A permanently-illuminated LED indicates video signal failure of the respective video
input.
Pushbutton for manual control of video output (V out). Depending on the device
configuration, individually switch cameras or start and stop predefined camera
sequences using this button.
An illuminated red Error LED indicates malfunctions such as system errors
A permanently-illuminated LED indicates an online connection.
Brief flashing of the Live LED during online connection indicates ongoing picture
transmission.
6
8
10
11
5
7
9
SVR device version v1.72
10.
15