Behringer EUROLIVE B15X Bedienungsanleitung Seite 28

28
EUROLIVE B15X/B12X
Bluetooth Connection
To stream audio from a Bluetooth-enabled device, you will need at least one B12X/B15X speaker and an iPad*/iPhone/Android*/Windows* device with basic Bluetooth
connectivity. With a streaming-only Bluetooth connection, all related B12X/B15X DSP functions must still be controlled directly from the B12X/B15X rear panel via the
rotary encoder.
For Apple* iOS or Android devices, you can also download our dedicated Behringer Live Control app from the App Store. The app allows you to fully control a single or
stereo pair of B12X/B15X speakers, including all DSP functions, remotely from your iOS or Android device (see "Bluetooth Control" below for more information).
*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.):
Mono Operation
1. Enable Bluetooth on your remote device.
2. Switch on your B12X/B15X speaker and minimize the volume.
3. Select "Pair device" from the B12X/B15X speaker's Bluetooth menu.
4. Check that your remote device is searching for a connection.
5. Once your device detects the B12X/B15X speaker, select the B12X/B15X speaker from your remote device's menu (e.g., "Behringer B12X").
6. Wait until the remote device shows an active connection, and then check the speaker's Bluetooth menu, which should display the name of the remote device
(e.g., "Xperia Z5 Compa").
7. Bluetooth music can now be streamed to your B12X/B15X speaker. The stereo signal will automatically mix down to mono.
8. The B12X/B15X speaker will display the Bluetooth indicator on the main, top-level DSP screen.
Stereo Operation
1. Complete the steps above to connect the first speaker to Bluetooth audio.
2. The first connected speaker automatically becomes the MASTER speaker.
3. Switch on the second speaker, which becomes the SLAVE speaker.
4. Select "Link speaker" from the SLAVE speaker's Bluetooth menu.