Nordcap SKF 12F GN 2/1 Aufbauanleitung Seite 12

1.4 Notes for the installer
After positioning and connecting the appliance, the technician must make sure that it has
been installed correctly.
1. Check that the electrical connection works correctly.
2. Check that the absorption complies with the standards.
3. Check that the refrigerant gas pressures are correct.
4. Perform at least one complete cycle to make sure that all the components of the
appliance work properly.
APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
12
SOLL.