JAQUET HO 100 Betriebsanweisung Seite 7

JAQUET HM 100 Contact tachometer
1. Affi x the convex (cone) or concave (funnel) attachment that best fi ts the application to
the meter shaft as shown on the right.
2. Turn the meter ON.
3. Use the UNITS button to select RPM (the display will refl ect the selection).
4. Touch the attachment to the moving object and read the displayed measurement.
Touch wheel to moving belt
Conveyor belt
I N C H A R G E O F S P E E D
All manuals and user guides at all-guides.com
Surface speed measurements (JAQUET HM 100 only)
1. Turn the meter on as described previously.
2. Touch the wheel to the moving object and read the measurement on
the display. Refer to diagram on the left.
3. Use the UNITS button to select the unit of measure: ft/min (feet per minute);
m/min (meters per minute); yds/min (yards per minute).
Rotating wheel
Touch the convex or con-
cave attachment to the
turning object
www.jaquet.com