Foscam BM1 Benutzerhandbuch Seite 8

Step 3:
Ensure that the camera is positioned at least 1 meter away from your baby.
Step 4:
To turn on the monitor, gently press and hold the Power Button for 3 seconds. Once it's
powered on, you'll be able to see the live view from the camera.
Important Notes:
1. In most cases, the camera should already be paired with the monitor. However, if it's not
paired, please refer to the next section for manual pairing instructions.
2. If you intend to record videos, make sure to install a memory card into either the monitor
or the camera before powering it on.
3. Upon powering on the monitor, please ensure to set the time and date as a priority.
4. If the monitor's power is too low, it may not power on properly or display abnormal
behavior. In such cases, please try again after allowing the monitor to charge for at least
10 minutes.
Interface For Monitoring
When an alarm or notification for abnormality is issued, additional icons will appear on the
monitoring interface.
No Signal
Battery Low
Temperature Alarm
Sound Alarm
8
Signal
Battery Capacity
Sound
Temperature
Feeding Reminder Enabled
Music Enabled
Sound Detection - Will turn on if
you enable VOX funtcion
Live Video Loop Enabled
Camera Channel
Date and Time
Feeding Reminder