Foscam BM1 Benutzerhandbuch Seite 10

Step 3:
By keeping the camera powered on, it will automatically pair with the monitor. Once
successfully paired, you will see a prompt indicating that the device is Paired.
Pairing, please wait...
Important Notes:
1. In case the pairing process fails, you will observe the prompt "Pairing failed" on the
screen. Please repeat the steps mentioned earlier and attempt the pairing process again.
2. The monitor can accommodate a maximum of four paired cameras.
3. If you reset your camera, ensure to pair it with the original channel rather than a new one
to avoid pairing issues and potential failures.
Replacing The Old Camera
To replace the old camera, simply pair a new camera with the same channel that the old
camera was previously paired with. Once the pairing with the new camera is successful, the
old camera will be automatically deleted from the system.
10
!
Paired