How To Get Started - Foscam BM1 Benutzerhandbuch

How To Get Started

Step 1:
Begin by charging the monitor. Connect the Power Adapter to the monitor and plug it into a
socket. It usually takes around 4 hours for the monitor to reach full charge, and once fully
charged, the battery can last for approximately 8 hours.
Step 2:
Next, connect the Power Adapter to the camera and plug it into a socket to power on the
camera. Once the camera is powered on, you'll hear a beep as confirmation.
7
Memory Card Slot
Antenna
Speaker
Stand
USB Type-C Port