Rollei Candela 220 RGB Anleitung Seite 39

Structure and Possible Combinations
Additional Equipment
3. Connecting the COB permanent light to a tripod
– Unscrew the screw of the tripod holder [20] so that you can place
the light on the tripod .
– Then place the light with the holder on the tripod and tighten the
screw of the holder [20] to fix it .
– Adjust the tilt angle of the light and retighten the locking handle
for adjusting the lamp angle [12] .
4. Mounting a studio umbrella
– Insert the handle of the umbrella through the umbrella holder
[18] . After adjustment, lock the screw [19] to fix it .
39