Herunterladen Diese Seite drucken

Lightmaxx Platinum LED Par 64 Bedienungsanleitung Seite 12

Vorschau ausblenden Andere Handbücher für Platinum LED Par 64:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety Instructions! Please read before connection
and operation!
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
CAUTION: To prevent the risk of electric shock, do not
open the device.
Please leave all maintenance and repairs to a qualified
service workshop or contact your distributor.
The lightning flash symbol warns the user
about non-insulated current and the risk of
electrocution.
The exclamation mark symbol warns the user
about important maintenance and operating
instructions in the manual.
Intended for indoor use only.
Read the manual.
This symbol indicates the minimum distance
to illuminated objects.
Please recycle the packaging correctly to protect the
environment.
Occasionally a new product may cause undesirable
odours or even emit smoke for a short period of time.
This reaction is normal and will disappear after a few
minutes.
The device is intended exclusively for use indoors
(IP20)! Please use this device only in dry environments.
Keep the device away from rain, moisture, direct heat
and dust.
In order to avoid condensation inside the unit, the
unit should adapt to the ambient temperature before
start-up.
Please place the device in a well-ventilated location
out of the reach of flammable materials or liquids.
Do not cover any ventilation openings as this may
result in overheating.
Please disconnect the mains plug if the device is not
to be used for a long period of time or if maintenance
work is to be carried out.
The device is designed for a maximum ambient tem-
perature of 40° Celsius.
12
All manuals and user guides at all-guides.com
The device should not be installed by inexperienced
persons and must be installed in compliance with the me-
chanical and electrical safety regulations in your country.
If the power cord is damaged, it must be replaced imme-
diately with an original spare part from the manufacturer.
Make sure that the mains voltage is not higher than the
voltage indicated on the housing.
If the unit malfunctions, please contact your dealer and
stop operating the unit immediately.
A minimum distance of 1m to flammable materials or
liquids must be maintained.
WARNING: Do not look directly into the light source!
Do not use the device when people with epilepsy are
nearby!
OVERHEAD MOUNTING
The installation may only be carried out by qualified
personnel. Incorrect installation can lead to considerable
damage and injury. Observe the load limits of the selected
installation position.
Ensure that there are no unauthorised persons un-
derneath the device during assembly or disassembly/
maintenance.
Manufacturer: MUSIC STORE professional GmbH,
Istanbulstraße 22-26, 51103 Köln, Germany

Werbung

loading

Diese Anleitung auch für:

Lig0006342-000