Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2 Installation and connection
•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.3 Operating
•
Wash the device thoroughly prior to first use (see 6.2 Cleaning).
•
Place the device's base on a table. The table surface must be temperature resistant,
dry, flat and stable.
•
Place the container on the base to that the lower controller is inserted into the
appropriate openings in the base.
Frothing milk:
1. Open the plastic lid and mount the spiral frother
to the bottom of the container.
NOTE!
It is not necessary to heat the milk thanks to the
integrated hearing function.
2. Pour fresh, cold milk into the container, up to
the lower „MAX" marking (1).
3. Plug the device into a grounded socket.
4. Press the ON/OFF switch. The control light at
by button will come on.
5. The milk inside the container will be stirred and
heated.
6. The device will automatically turn itself off after
90 seconds.
2
1
- 21 -
Werbung
