Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8
www.aeg.com
5.1 Consumption values
Programme
P1
ECO
P2
AUTOSENSE
P3
PROZONE
P4
PRO
P5
GLASS
P6
30MIN
P7
PREWASH
P8
EXTRA SILENT
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
6. SETTINGS
6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
the acoustic signal for end of
programme.
• The deactivation of the rinse aid
dispenser when you want to use the
Multitab option without rinse aid.
Water
1)
(l)
10.2
7 - 14
14 - 16
12.5 - 14.5
12 - 14
10
4
9 - 10
Energy
(kWh)
0.932
0.6 - 1.4
1.2 - 1.5
1.4 - 1.6
0.7 - 0.9
0.9
0.1
1.0 - 1.2
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
• The level of rinse aid according to the
required dosage.
These settings will be saved until you
change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
Duration
(min)
225
40 - 150
139 - 149
154 - 164
75 - 85
30
14
219 - 229
Werbung
