Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.4 How to use auxiliary positioning function in LaserGRBL
1)Click "Set Origin"
2)Click "Frame"
3)Click "Auxiliary positioning"
4)Click "Start"
4. Precautions
1.When using roller, please make sure that you have placed the roller parallel to the working area of the engraving machine. Otherwise, the
pattern engraved on the object may become distorted.
2.When using roller with the support bracket to engrave longer objects, select the appropriate gear and move the bracket to the proper position
to ensure that the object is placed horizontally.
3.When using roller, don't forget to update the parameters of the object being tested in the roller settings window each time it is changed.
4.When engraving on a flat surface, disable "Enable Rotary" to prevent distortion of the engraving pattern.
5.When holding the laser by hand, do not hold onto the protective cover. The magnetically-fixed protective cover of the laser does not have
enough magnetic strength to hold the weight of the entire laser. Otherwise, it may fall off and cause damage to the laser or injure the feet.
1
2
3
4
24
Werbung
