Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LaserGRBL Installation
1. Download and install the software from the LaserGRBL official website or the link below:
https://lasergrbl.com/download/
Connect the Machine to LaserGRBL
1. Plug in the power and USB cable, and turn on the machine.
2. Connect the machine to the computer.
2.1 Open the LaserGRBL software and install the CH340 driver. Restart the computer after installation.
2.2 Confirm the values of "COM" and "Baud".
Installation and Use of LaserGRBL Software
Driver installation
Driver installation/uninstallation
Select the INF file
Installation
Unload
Help
18
Werbung
