Samsung SCULPTURE S9W Bedienungsanleitung Seite 7

Installing batteries into the remote control
Match the polarity of the batteries to the symbols on the battery
compartment.
- Use the remote control within 7m the TV.
- Bright light may affect the performance of the remote control.
Avoid using near bright fluorescent lights or neon signs.
- The colour and shape of the remote may vary depending on the
model.
Installing batteries into the Samsung Smart
Control
To use the Samsung Smart Control, push the rear cover open in the direction of the arrow
and insert the batteries as shown in the figure. Make sure that the positive and negative
ends are facing the correct direction.
- Alkaline batteries are recommended for longer battery life.
Pairing the TV to the Samsung Smart Control
If your Samsung Smart Control is not paired to your TV, press and
hold the buttons labelled ① and ② simultaneously for 3 seconds
or more to pair the Samsung Smart Control to the TV.
- The Samsung Smart Control can only be paired to one TV at
a time.
Connecting to a Network
Connecting the TV to a network gives you access to online services, such as Smart Hub, as
well as software updates.
Network Connection - Wireless
Connect the TV to the Internet using a standard router or modem.
Wireless IP Router or
Modem with a DHCP Server
The LAN Port
on the Wall
LAN Cable (Not Supplied)
Network Connection - Wired
One Connect One Connect Connect your TV to your network using a LAN cable.
- The TV does not support the network speeds less than or
equal to 10 Mbps.
- Use a Category 7 cable for the connection.
English - 7