Herunterladen Inhalt Inhalt Diese Seite drucken

English; Operating Instructions; Description; Safety Notes - STIEBEL ELTRON MAE Bedienungsanleitung

Drucklose armaturen f¸r mini-durchlauferhitzer dnm gebrauchs- und montageanweisung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Operating instructions

1.1 Description

Fittings MAE, MAZ and MAW are intended for use with the open mini instantaneous water heater DNM.

1.2 Safety Notes

The open outlet prevents a pressure build-up at the heater. The outlet must not therefore be closed. Effervescing units or hoses with jet
regulators must not be fitted.

1.3 Care and Maintenance

To clean the fitting use soap-based cleaners only. Do not use any abrasive or solvent cleaners or disinfectants. Remove limescale from calcified jet
regulators (3, in the outlet).

1.4 Important Note

Keep these instructions carefully and pass on to any new user.
Show these instructions to the expert when any repairs are performed.

1.5 MAE

1.5.1 Components
1 Handle
2 Fitting body
3 Special jet regulator
B
4 Connection hose KW -
5 Connection hose 3/8" -
6 Connection hose 3/8" -
7 Sealing ring
8 Washer
9 U-shaped washer
10 U-shaped thrust washer
11 Clamping sleeve (SW13)
11.1 Drain sleeve
11.2 Seal
11.3 Shaped seal
11.4 Tundish
12 Plug rod
13 Hinge piece
1.7.2 Operation
The single lever washbasin fitting is operated
by swivelling the handle (1) in two planes.
Left / right for „hot / cold" and raise / lower
for „on / off".
1
12
8
4
13
5
6
10
8
for teh user and the professional

1.6 MAZ

1.6.1 Components
1.1 Hot tap
1.2 Cold tap
2 Fitting body
!
blue
3 Special jet regulator
"
4 Swivel outlet
blue
!
red
5 Connection hose KW -
6 Connection hose 3/8" -
7 Connection hose 3/8" -
8 Sealing ring
9 Spacer
10 U-shaped washer
11 U-shaped thrust washer
12 Clamping sleeve (SW13)
1.6.2 Operation
For the washbasin fitting, set the desired
water quantity and temperature by opening
both taps (1).
1.1
2
3
7
9
11.1
5
11.2
9
11.3
11
12
11.4
B
!
blue
"
blue
!
red
4
1.2
2
7
6
8
10

1.7 MAW

1.7.2 Components
1.1 Hot tap
1.2 Cold tap
2 Fitting body
3 Special jet regulator
4 Swivel outlet
5 Wall covering plate
1.5.2 Operation
For the twin-tap wall fitting, set the desired
water quantity and temperature by opening
both taps (1).
5
3
1.2
2
4
B
1.1
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

MazMaw185476185475185474

Inhaltsverzeichnis