Scheppach 7906100715 Originalbetriebsanleitung Seite 10

Do not lose this safety information.
Residual risks
Even if you use this tool in accordance with instruc-
tions, certain residual risks cannot be eliminated.
The following hazards may arise in connection with
the equipment's construction and layout:
1. Risk of pinching.
2. Risk of injury from staples.
3. Damage to hearing, if no suitable ear protection
is applied.
4. Health damage caused by hand-arm vibra-
tions, if the equipment is not properly guided
and maintained.
Features and fittings
1. Exhaust air aperture (can be rotated)
2. Trigger
3. Handle
4. Threaded nipple
5. Magazine lever
6. Magazine
7. Fill level indicator
8. Trigger lock
9. Mouth
10. Face plate
11. Face plate quick clamp lever
Intended use
The stapler is a pneumatically operated tool de-
signed for versatile use.
This equipment is designed for driving finishing nails
and staples into wood and similar materials. Only use
the types of nails/staples described in the "Technical
data" section or illustrated on the information sign
on the magazine. Never use any other nails/staples.
Never use on hard surfaces such as stone, metal,
etc., either.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the manu-
facturer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Only allow repairs and services to be carried out by
authorized professional repair shops.
10 І 56
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Remember.
If the inner diameter of the hose is insufficient
and the length of the hose too long, this will re-
sult in a loss of power on the equipment.
Technical data
Max. permitted operating pres-
sure
Recommended pressure range
Air consumption
Staple width
Staple length
Nail length
Recommended hose diameter
Weight
Sound pressure level L
pA
Sound power level L
WA
Vibration
These values for noise emissions are equipment-
based characteristic values and do not reflect the
noise generated at the place of use. The noise gen-
erated at the place of use will depend, for example,
on the work area, the workpiece, workpiece support
and the number of stapling/nailing operations. The
value given for vibration is an equipmentbased char-
acteristic value and does not represent the impact
on the hand and arm system when the equipment is
used. The impact on the hand and arm system when
the equipment is used will depend, for example, on
the force of the grip, the pressing force, the direction
in which you are working, the air pressure setting,
the workpiece and the workpiece support.
Reduce noise generation and vibration to a mini-
mum!
Use only equipment that is in perfect condition.
•
Maintain and clean the equipment regularly.
•
Adopt your way of working to the equipment.
•
Do not overload the equipment.
•
• Have the equipment checked if necessary.
Switch off the equipment when not in use.
•
Wear gloves.
•
Compressed air quality:
Purified and with oil mist.
Air supply:
Via a conditioning unit with filter pressure reducer
and mist oiler connected to a compressed air source.
Remember:
Wear the necessary protective clothing when
working with the stapler, in particular safety
goggles.
8.3 bar
4.7-7.5 bar
1.5 l
5.7 mm
16-40 mm
15-50 mm
10 mm
1.2 kg
85.6 dB(A)
98.6 dB(A)
2.01 m/s
2