Viribus ATB-C024-GE Benutzerhandbuch Seite 6

Installation
To see these instructions in video form, go to our YouTube channel Viribus Bikes and find
Viribus Adult Tricycle with Front and Rear Basket Assembly Video, ATB C
1. Installing the Main and Rear Frames
1. Lift the main frame (1) and rear frame (5). Rest them vertically on the ground. Remove the 6
sets of nuts, washers and bolts from the rear frame. Place them nearby.
2. Start with either side. Align the slots and holes on the rear frame with those on the main frame
as shown.
3. Replace the 3 sets of bolts and washers.
4. Replace the nuts and tighten them with an adjustable wrench.
5. Secure the other side following the same steps.
Note: Make sure each set of bolt, washer and nut is tightly secured. Otherwise, the
installation of the chain will be impacted.
www.youtube.com/watch?v= qT9VxMef9Zk
4