Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. Installing the Rear Brake
1. Pass the round metal head of the rear brake cable through the right brake handle.
2. Secure it to the brake handle by rotating the fastener.
3. Feed the cable's black outer casing into the brake handle.
4. Loosen the nut securing the cable clamp on the rear brake.
5. Feed the brake cable through the inline hollow bolt (barrel adjuster), rear brake cable
spring (11) and past the cable clamp.
6. Secure the black outer casing in the barrel adjuster by tightening the nut.
7. Straighten the cable manually.
8. Tighten the spring and the nut securing the cable clamp.
17
Werbung
