Werbung
Verfügbare Sprachen
Verfügbare Sprachen
message appears on the pewag levo manager and the pewag
EN
levo hook LH (status display). It is therefore no longer possible
to overload the pewag levo hook LH unintentionally, making
the application safer for both the user and the load. Please
note that this weighing module has been calibrated but has not
been verified and that verification is not possible.
6.3 Multi-adapter and end piece
If several batteries and charging stations are used, it makes
sense to connect the individual charging stations with the
pewag multi-adapter. This eliminates the need of connecting
each individual charging station with a socket using a cable.
The pewag multi-adapter makes it possible to operate up to ten
charging stations in one line with a single device plug.
Fig. 9: pewag levo battery charging station multi-adapter
You will need one multi-adapter per charging station. Connect
the adapters with each other and then connect the charging
stations with the multi-adapter (maximum of 10 in line!) The
end piece (marked in green in the illustration) is part of the
multi-adapter and is a visual feature only.
6.4 pewag levo manager
The pewag levo manager software is a comprehensive
configuration and analysis tool for the pewag levo hook LH.
Among others, the programme offers the following options:
• Managing the radio control units.
• Formation of hook groups.
• Weighing and taring function.
• Alarm feature (e.g. weight or temperature restrictions).
• Monitoring of temperature variation.
• Configuration of various parameters.
• Export and import functions of data.
For a detailed list of the individual functions of the levo
manager, please contact your supplier or read the respective
manual. The software must be installed on a Windows PC or
laptop.
The levo manager may be downloaded from the levo landing
page (see QR-Code on page 3). The handbook for the pewag
levo manager is also located on the landing page.
pewag levo hook LH
32
6.5 pewag levo manager USB Dongle
The levo manager USB
Dongle is required for the
communication between the
hook/radio control unit and the
pewag levo manager software.
Wireless communication is set
up by connecting the device
to the USB port of a Windows
computer. An Internet
connection is not required.
The maximum transmitting
signal (reach) is 100 m
(unobstructed).
6.6 pewag levo hook LH Data logger
A Data logger is a processor-controlled storage unit that
records certain data via an interface and stores them in a
storage medium. The levo Data logger has the option of
recording data from the weighing module as well as other
data (see pewag levo manager handbook). Data transfer and
configurations of the weighing module are also possible in
combination with these optional add-ons:
• Weighing module (see section 6.2).
• levo manager software (see section 6.4).
• levo manager USB Dongle (see section 6.5).
This data may be used for evaluations and statistics. The Data
logger is part of the basic version.
7. Attaching and lifting the load
7.1 Attachment mechanism
The attachment mechanism in the upper part of the pewag levo
hook LH is pivoted. By using the foldable clips (shown in red in
fig. 12), it is possible to lock the attachment mechanism in one
position, securing it against turning. To do this, lift up the clips.
The attachment mechanism may be locked at 45° intervals. To
release the lock, fold down the clips.
If you would like to lock the attachment mechanism in position,
align the pewag levo hook LH (when not under load) in such a
way that the load to be lifted cannot turn when lifted.
It is important to prevent the load from turning when the
attachment mechanism is
locked in place as the pewag
levo hook LH will not be able to
turn with the load and the load
might therefore swing back.
Never try to lock or release
the attachment mechanism
when the load is lifted! This
may cause serious accidents
with material and/or personal
damage.
Fig. 10: pewag levo manager
USB Dongle
Fig. 11: Foldable clips
Werbung
