Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Designated use and
technical data
pewag levo hooks LH are designed exclusively for the lifting
and transporting of loads, which may be lifted and lowered
via radio control. The system is a connecting link between the
crane hook and the load and/or the lifting device.
4.1 pewag levo hook LH
Load
The hook may only be loaded at the bearing area and in a
vertical direction (fig. xx), with the maximum load capacity as
specified on the identification plate.
Fig. 1: May only be loaded in a vertical direction
Operating temperature:
The long-term permitted operating range for the basis set is
-20 °C to +60 °C (-4 °F to 140 °F).
Shock-loading
The hook may only be loaded vertically and must not be
subject to shock-loading. Collisions of the suspended hook
of any kind (when under load or when not under load) are not
permitted.
Protection class
IP 65 (except for radio control, charging station and
multi-adapter)
Safety factor against break:
4:1 or 5:1 (Japan)
4.2 Battery
Nominal voltage
29.6 V
Capacity
3.4 Ah
Energy content
100.64 Wh
Weight
0.57 kg
Cell type
Li-Ion, rechargeable
Temperature control
Yes
Deep discharge protection Yes
Overcharge protection
Yes
Working temperature
-20 °C to +60 °C /
-4 °F to +140 °F
F
F
4.3 Radio control
Frequency
868 MHz (Europe), 915 MHz (USA)
Range
100 m
Battery
Button battery type CR2032, 3 V
Certification
ETSI (Europe), FCC (USA)
Transmittance
Encoded AES 128 bit
4.4 Charging station and
multi-adapter
Operating voltage
100/240 V
Fuse
Microfuse 10 A, slow
Multi-adapter
Maximum 10 in line
4.5 Labelling and identification
On the casing side of the pewag levo hook LH, there is an
identification plate with the following information:
• Model
• Year of construction
• Serial number
• Load capacity
• CE marking
• Manufacturer
The information on the identification plate must be legible at
all times.
EN
pewag levo hook LH
27
Werbung
