Herunterladen Diese Seite drucken

Glaziar Calima YD-T928 Benutzerhandbuch Seite 3

Tragbarer fan-heizer

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

blocked.
The heater has hot parts and sparking parts inside. Do not use in areas where
13.
gasoline, paint, or flammable liquids are used or stored.
14.
Use this appliance only as described in this manual. Any use not recommen-
ded by the manufacturer may cause fire, electric shock,or injury to persons.
Always plug heaters directly into a wall outlet/ receptacle. If you have to use
15.
an extension cord, the cord should be no less than 14 AWG minimun size and
rated no less than 2000 wats.
16.
To prevent overload and blown fuses, be sure that no other appliances is
plugged into the same outlet (receptacle) or into another outlet ( receptacle)
wired into the same circuit.
17.
It is normal for the heater´s plug and cord to feel warm to the touch. A plug or
cord which becomes hot to the touch or becomes distorted in shape may be
a result of a warm electrical outlet ( receptacle). Worn outlets or receptacles
should be replaced prior to further use of the heater. Plugging this heater into
a worn outlet (receptacle) may result in overheating of the power cord or fire.
Be sure that the plug is fully inserted into an appropriate receptacle. Please
18.
remember that receptacles also deteriorate due to aging and continuous use:
check periodically for signs of overheating or deformations of the plug. If any
overheating or deformation is present, immediately discontinue using the
receptacle and contact a qualified electrician.
CAUTION. To prevent electric shock, match wide blade of plug to wide lot of
19.
receptacle and insert completely.
20.
Do not cover the appliance while it is functioning in order to avoid overhea-
ting and / or risk of fire.
Do not place the heater near a bed because objects such as pillows or blan-
21.
kets can fall off the bed and be ignited by the heater.
22.
Check your heater cord and plug connections.
a) Faulty wall outlet connections or loose plugs can cause the outlet or plug
to overheat. Be sure the plug fits tight in outlet.
b)Heaters draw more current than small appliances. Overheating of the outlet
may occur even if it has not occurred with the use of other appliances.
c) During use, check frequently to determine if your plug outlet or faceplate is
3

Werbung

loading