FAAC TM2 Bedienungsanleitung Seite 11

EU DECLARATION OF CONFORMITY
FAAC S.p.A. Soc. Unipersonale hereby declares that the TM2 motor complies
with the European Union's applicable harmonisation regulations: Directive
2014/30/EU, Directive 2011/65/EU.
The full text of the EU declaration of conformity is available at the following
Internet address: http://www.faac.biz/certificates
DECLARATION OF INCORPORATION FOR PARTLY COMPLETED
MACHINERY
(2006/42/EC ANNEX II P.1, PAR. B)
Manufacturer and person authorised to prepare the relevant technical
documentation
Company name: FAAC S.p.A. Soc. Unipersonale
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA – ITALY
hereby declares that, for the partly completed machinery:
Description: Tubular motors for screens and roller shutters
Model: TM2
The essential requirements of the Machinery Directive 2006/42/EC (including
all applicable amendments) have been applied and fulfilled. The relevant
technical documentation has been compiled in compliance with Annex VII B.
Furthermore, the following harmonised standards have been applied:
EN 60335-2-97:2006+A2:2010+A11:2008+A12:2015.
And also undertakes to transmit, in response to a reasoned request by the
national authorities, relevant information on the partly completed machinery
by mail or e-mail.
Finally, the manufacturer declares that the above-mentioned partly comple-
ted machinery must not be commissioned until the final machine in which
it is to be incorporated has been declared compliant with the requirements
of the same Machinery Directive 2006/42/EC.
Bologna, 18-07-2018 CEO A. Marcellan
TM2 11 A4516_6G24_Rev.A