nordfalk 42252 Gebrauchsanleitung Seite 19

6. Using the monitor
You can monitor the status of your workout by displaying the
time, speed, distance, calories and total distance on the
screen.
Description of the button:
If you keep pressing the button, functions are selected in order
(SCAN - TIME - SPEED - DISTANCE - CALORIES - ODO).
If the button is pressed for more than 3 seconds, the entire
content is initialized and "0" is displayed.
Functions:
- SCAN (Automatic conversion): All functions are changed in the
following order and the automatic conversion is performed
continuously for 5 seconds.
TIME - SPEED - DISTANCE - CALORIES - ODO (Total)
- TIME: Shows the total time you have been exercising, ranging
from 0:00 minute to 99:99 minutes
- SPEED: Displays the current speed up to 99.99.
- DISTANCE: Shows the distance travelled, ranging from 0.00
to 99.99 km and increasing by 0.01.
- CALORIES: Displays total calories burned from 0 to 9999 and
increases by 1 cal.
- ODO (Total distance): Shows the distance travelled, ranging
from 0.00 to 99.99 km and increasing by 0.01.
Insert the handle into the main body as shown in
the picture. The monitor and the handle are
assembled. Loosen the bolt connected to the
monitor and connect them according to the
direction shown in the picture.
19