nordfalk 42252 Gebrauchsanleitung Seite 16

5. Assembly sequence
Installation precautions
- Follow the instructions in order.
- Wear gloves to protect your hands during assembly.
Tools required to connect the front support to the rear support.
1. Spread out the main parts A and B.
2. Mount the front and rear support frames in sequence. The
front and rear support frames can be distinguished from each
other. Mount the frame with the wheels on the front. Tighten
the nuts and washers on the support frame with a small
spanner.
Front support
Rear support
First tighten the bolts of
the front frame by hand, as
shown in the picture, and
then do it again with a
small spanner.
16