Vankyo PERFORMANCE V630W Benutzerhandbuch Seite 11

4. Make sure your projector is close to the mobile device and the router when using
wireless connection.
5. Some mobile devices may not support screen mirroring due to the compatibility.
*Upgrade the firmware version of screen mirroring
When there is a newer version, you will see Discover new firmware... on the projected
screen, please press OK button on the projector/remote and follow the steps to upgrade
the firmware version of screen mirroring as needed.
Notes:
1) Make sure the projector is connected to Wi-Fi and do not power off during updating.
2) It takes around 6-8 minutes for the update completes, please wait patiently.
3) The screen mirroring system will restart once the upgrade is completed.
Screen mirroring with the Original USB cable
For iOS system
1) Turn on the projector, select Screen Mirroring as the input source to enter the
interface of Screen Mirroring for iOS System.
2) Connect your iOS mobile device to the USB port of the projector with the ORIGINAL
lightning cable.
3) Select Trust in the pop-up window of Trust this computer.
4) The display of your iOS mobile device will be projected to the wall/screen after a while.
Tip: If the projection fails, please unplug the lightning cable from the projector and
repeat the steps mentioned above.
For Android system
1) Turn on the projector, select Screen Mirroring as the input source, then press the
OK button on the projector/remote to switch to the interface of Screen Mirroring
for Android System.
2) Go to the settings of your mobile device, find Developer options, and turn on
USB debugging.
11