Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection to the AS-i system
Connect the sensor with the AS-i system by using the M12 connector.
Voltage is supplied via the AS-i network.
Wiring:
Referring to UL: For use on a low voltage circuit with overcurrent pro-
tection in accordance with UL873 Tab. 28.1 or Imax = 100/Ub (Ub =
voltage of the circuit).
Installation and set-up / Operation
After mounting and wiring check whether the unit operates correctly.
Indication at the sensor in the operating mode:
LED green
LED red
Slave profile
I/O Code [hex]
ID Code [hex]
Extended ID2 Code [hex]
ID1 Code code for temperature values [hex]
Slave address (factory setting)
12
1
BN
ASI+
3
BU
ASI
ON = unit is then ready for operation
ON = no communication
FLASHING = internal fault
is transferred to the master as periphery fault
Core colours of ifm sockets:
1 = BN (brown),
3 = BU (blue)
7
3
C
6
0
Werbung
