Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
Addressing
You can address the sensor by using an addressing unit, the master or
by means of the AS-i software of the host (the components must sup-
port AS-i version 2.11).
Assign an address between 1 and 31. At the factory the address is set
to 0.
Mechanical installation
There are a number of possibilities:
1. Installation to G½ process connection.
2. Installation with E30016 (G½) or E30024 (½" NPT) progressive ring
fitting.
3. Installation with welding adapter E30055 (ball adapter) or E30056
(collar adapter).
4. Installation with E34110 clamp adapter for hygienic systems (A) and
process adapter (B).
standard applications
tightening torque: 30...50 Nm
For information on the installation with adapters / progressive ring
fittings please refer to the instructions enclosed with the respective articles.
hygienic systems
11
Werbung
