Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3 Measurement
4.3.1 Single-mode measurement
Short-time press ON button to switch on
the device and the laser pointer. After
30s inactivity the laser pointer will be
switched off automatically.
Aim the laser onto target and press
again will trigger single-mode meas-
urement, the result will be displayed
immediately as shown
4.3.2 Continuous-mode measurement
When the device is switched on, long-
lime pressing button will trigger continu-
ous-mode measurement.
Current measurement value is dis-
played in LCD bottom line as shown.
All manuals and user guides at all-guides.com
23
Werbung
