Samsung RL3 A Serie Benutzerhandbuch Seite 31

STEP 2 Spacing (applicable models only)
STEP 3 Flooring
Untitled-11 31
1. Open the door and locate the provided
spacer (Gray block).
2. Unpack the spacer and attach it to the
rear of the refrigerator as shown. They
help ventilate air to the rear wall and
save power consumption.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
English 31
2021-06-28 5:30:37