Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
4.6.8 Upgrade
This function is used when users need to upgrade the network camera for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided
by your installer or distributor.
Step1: Click "
" to browse to where you save the upgrade files, and select them one by one
until all files are selected (up to four files).
Step2: To make a system backup for restore all camera configurations later, click "Backup".
Step3: Click "Upgrade" to start system upgrading.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power
during firmware upgrade, or the upgrade may be failed. The camera will reboot
after the upgrade.
25
Werbung
Kapitel
Inhaltsverzeichnis
