Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
4.5.3 Time
Set daylight saving time and the current time, and click "Save" to confirm.
Function
Description
Time Configuration
Set the current date.
Date
Set the current time.
Time
Daylight Saving Time Configuration
Specify whether to use daylight saving time (Enable / Disable).
Daylight Saving Time
If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight
saving time in hours (Adjust Time).
4.5.4 Advance
Adjust the camera parameters if necessary. You can preview the result on the right side of this
page.
Item
Description
Back Light
It is the function to adjust the image to compensate for an area that is overpowered by brightness
because of excessive light. The image will be properly exposed for clearness. Select to activate
(ON) or disable (OFF) this function.
Note: This function is available only in the day mode.
AGC Max
It is a function to adjust the amplitude of the signal input according to different light conditions.
There are three options available: Low / Middle / High.
Mirror
Mirror is used when you want to rotate the images horizontally based on your installation
situation.
The options are: ON / OFF.
20
Werbung
Kapitel
Inhaltsverzeichnis
