Epson ELPMB26 Bedienungsanleitung Seite 26

The ceiling plate can be horizontally rotated at ±5 degrees. Adjust the direction of the
projector using four bolts secured loosely. After adjusting the direction, tighten the hexagon
nuts securely.
If necessary, use the decorative plate to hide the gap between the pole and the ceiling
surface when the ceiling plate is mounted directly to the concrete surface.
Fitting the Projector Plate to the Projector
Warning
vTighten all screws securely.
After securing the screws, retighten them and make sure that they are not loose.
vUse the supplied safety wires to prevent the projector from falling. sp.31
vApplying a screw-locking adhesive, lubricant, oil or other substance to the
points at which the projector is fixed to the ceiling mount can make the case
crack and the projector fall, leading to damage or injury. Do not use any sort
of adhesive, lubricant, or oil when installing or adjusting the ceiling mount.
26
The center of rotation
when adjusting the direction