Zibro SRE 149 Gebrauchsanweisung Seite 10

1. Introduction
Description of the week timer:
Digital timer (remote control) that enables you
to programme the times at which the heater
switches on and off.
Use:
Fitted to all Zibro Laser and Laser Vision heaters
from production year 2001 onwards, with the
exception of the Laser SRE 149, SRE 150E, SRE
152, SRE 153, SRE 154, SRE 169 and SRE 910.
Functions and options:
• A maximum of 3 programmable activations
and deactivations per day.
• Programming per day or for several days, to
a maximum of 7 days per week.
• Minimum switching interval 1 hour.
• Minimum operating time 1 hour.
• Summer and winter time adjustment
(+/- 1 hour).
• Temporary programme interruption.
What you need to know in advance:
This manual is intended solely for the connecti-
on and operation of the week timer. Zibro hea-
ters must be installed and operated according
to the user manual supplied with the heaters.
The week timer can only be used to programme
when the heater switches on and off. The des-
ired temperature can only be set via the display
panel on the heater.
Any problems or disruptions with the heater
must be solved according to the instructions
supplied with the heater.
For more information, please visit our website
www.zibro.com.
4
10
2. Product specifications
• 24 V dc, 200-300 mA.
• Power consumed is less than 0.8 Watt.
• Back-up memory for all settings max. 100
hours.
• Battery loading time 28 hours.
• Length of connection cable 1.5 metres
• Magnetic attachment
(a multitude of attachment options).
• Time diagramme is only for indication.
• CE-EMC.
• 2 Year guarantee.
3. Connection
a. Open the covering plate of the connection
box on the back of the heater by removing
the screw from the plate (see fig. 1).
b. Insert the connector of the week timer into
the heater connection box.
c. Place the week timer on the heater
(see fig. 2).
d. Connect the heater to the electricity supply
by inserting the heater plug into the wall
socket. If the week timer display lights up,
it is connected correctly.
Warning!
Never allow the week timer and the connection
cable to come into contact with hot compo-
nents such as the heater grille.
Fig. 1 Fig. 2