Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
PRE-ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY MAINTENANCE TIPS
•
Do not expose the wooden parts or roof covering to direct sunlight during assembly.
•
To prolong the life on your garden shed, we recommend that you use a wood stain on the pieces before
assembly so that you can reach all the areas that will be inaccessible once built.
•
The woodwork must be treated with a protective layer of fungicide (interior and exterior) and pesticide.
(to combat against fungus and insects).
•
During this treatment process, it's not advisable to leave the apparatus in direct sunlight or in the rain.
CHOOSING AND PREPARING A LOCATION
•
The best location is one that is high up, allowing water to drain away. Find a location that is far enough
away from trees.
•
Make sure that you assemble your shed on a dry, calm day. Do not try to assemble your shed on a
windy day.
•
The installation area must be clean, clear and totally flat. A cluttered, damp or wet work area in¬creases
the risk of injury. Make sure that there are no cables on the ground during assembly.
•
Leave yourself enough work space to be able to move and position the components easily during as-
sembly. You must ensure that there is enough space at the entrance for the door(s) of your storage cabin
to open fully.
16
25/10/2023
Werbung
