IKAR ASS-4 Bedienungsanleitung Seite 19

Approved support structure in accordance with Directive 2006/42/EC for the IKAR winch for loads and
IKAR winch for loads and persons (PLW) as component:
The IKAR winch for loads and persons (PLW) is attached to the
cantilever using the IKAR 41-54/AWS mounting bracket. This
requires attaching the mounting bracket () to the winch plate
with three M10x16 bolts.
Insert the IKAR winch for loads and persons (PLW) with attached
mounting bracket. Attach the mounting bracket
to the cantilever arm with the socket pin.
Attention: Use only IKAR mounting brackets.
Only IKAR equipment shall be mounted in IKAR mounting
brackets.
Always observe the instruction manual and safety instructions
for the IKAR winch for loads and persons.
Equipment assembly
Please note:
persons
1
3
5
19
1
2
2
4
GB