Lenz Digital plus SILVER+PluX12 Information Seite 39

8 (7)
1 Constant braking distance with speed step 0 activated
52 0-255 Braking distance with activated constant braking distance
53 0-255 Slow approach with ABC
54 0-255 Stopping time in push-pull operation, 1 to 256 sec
55 0-255 Sets brightness at function outputs A 255=max
0-255
56 Sets brightness at function outputs B 255=max
Function mapping:
57
Each bit of the CV stands for a function of the digital system:
-
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
59,
Bit 8(7) for function 8. If you wish to allocate a function to the
61
dimming, the respective bit must be set.
57 0-255 Mapping of Dimming for F-Outputs A to D (no ex-works setting)
0-255
58 Shunting speed (ex-works setting F3)
59 0-255 Switching off the delay (ex-works setting F4)
0-255
60 Lighting effect at function outputs A and B:
The tens digit for function
output B:
0 No effect
1 Marslight
2 Gyrolight
3 Strobe
4 Double strobe
61 0-255 Function mapping: lighting effect at function outputs A and B
62 0-255 Lighting effect at function outputs C and D.
The units digit of the value
stands for function output A
0 No effect
1 Marslight
2 Gyrolight
3 Strobe
4 Double strobe
39
50
E
48
4
255
255
0
4
8
0
0
0