Lenz Digital plus SILVER+PluX12 Information Seite 34

34 Information SILVER+PluX12 Decoder
For detailed instructions on how to program using the above-mentioned devices, please refer to the
operating manuals which accompany those devices.
The decoder is programmed ex-works for operation with address 3 and 28 running notches. The
decoder can be used with these basic configurations immediately after purchase.
5.1 Resetting the decoder
If you wish to reset all the decoder CVs to the ex-works setting, enter value 8 or 33 in CV8. The
CVs of a connected S.U.S.I. module are not reset!