Styro hansa Flash Gebrauchsanleitung Seite 8

Turning the light on/off
1. Connect USB C plug of the cable to the
lamp port and the other end to UBS port
of the computer or to a 5 V adapter.
2. Adjust the lamp tube to the desired
position.
3. Touch the end touch switches for main
(right) and back light (left) to turn on / off
and control the light.
- short touch: cycle
ON, 3 color temperature, OFF
- long touch: stepless dimming
- double click: Main and backside
lights OFF with memory (dim-
ming, color temperature), also
when USB power supply is off.
Lighting source
• Lighting source service life: 30 000 hours
• The lighting source cannot be replaced.
• The construction of the luminaire does
not allow the lighting source to be
replaced, as there is a risk of damaging
the luminaire.
8
GB OPERATING INSTRUCTIONS
Care and cleaning
WARNING
Hazardous grid voltage!
Risk of electric shock!
Improper use could result in
electric shock.
– When cleaning the light, always pull the
mains plug out of the socket. When doing
so, always take hold of the plug and not
the cord.
– Make sure that no water penetrates the
inside of the light or other parts carrying
a current.
– Carefully wipe off the light with a damp
cloth or a dry dust cloth.
Technical data
Voltage:
Power:
Luminous flux:
Colour temperature:
Protection class:
Ingress protection:
Model number:
This product contains light sources of
energy efficiency class F (main light) and
G (backlight).
Distribution
styro ag
Frauholzstrasse 27
CH-6422 Steinen
Tel. +41 (0)41 833 80 10
www.styro.ch
EU Distributor
styro GmbH
Industriestrasse 2
D-91583 Schillingsfürst
Tel. +49 9868 98949-0
www.styro.de
LED lamp Flash
5 V DC, 1 A
5 W
170 lm
3100 – 6400 K
III
IP20
41-5011.004