Panasonic RF-1130 LB Bedienungsanleitung Seite 5

To Check the Battery Condition:
1) Set the Power switch@ to ''ON''.
2) Tune in no station with the RADIO/PHONO selector® at "RADIO", and the Battery
meter (combined with the Tuning meter)@ then shows battery condition.
(AW TUNING
6 2
6 4
8
wety
Aon TER
wetTy 2
\ Searitiy
Mains Operation:
1) Confirm if the AC voltage selector® is set to your mains voltage position, and if
not, set the selector to the correct position (''110~125V"" or ''220~240V'') with a'
screwdriver. (See Fig. 5.)
The RF-1130LBE is designed to operate on 240V only and has no voltage selector.
2) Connect the accessory mains lead to the 'AC IN" jack® and to a mains socket.
(See Fig. 6.)
When the mains lead is plugged into the ''AC IN" jack@® on the receiver, the power
supply is automatically switched from battery to mains.
Mains socket
eh 110V
|
240V 125V
AC voltage selector
Mains lead
Fig. 5