Hama 00011412 Bedienungsanleitung Seite 13

ч
8.
А.
9.
MAINTENANCE
Do not mix new and used batteries for
powering the Universal Remote Control, as old
batteries tend to leak and may cause power
drain.
Do not use corrosive or abrasive cleansers on
your Universal Remote Control.
Keep the Universal Remote Control dust free by
wiping it with a soft, dry cloth.
TROUBLESHOOTING
. My Universal Remote Control does not work at
all!
Check your A/V device. If the device"s main
switch is turned off, your URC cannot operate
your device.
Check whether your batteries are inserted
properly and are in the correct +/- position.
Check whether you have pressed the correspon-
ding device mode key for your device.
f the batteries are low, replace the batteries.
. If several Device Codes are listed under the
brand of my A/V device, how
can I select the correct Device Code?
o determine the correct Device Code for your
AN device, test the codes one by one until most
keys work properly.
My A/V equipment responds only to some of the
commands.
ry other codes until most keys work properly.
Service und Support
If you have questions on the product, you are
welcome to contact Hama Product Consulting.
Hotline: +49 9091 502-115
For further support information please visit:
www.hama.com
®
11
05.04.12 10:2