Hama 00011412 Bedienungsanleitung Seite 12

®
5.4 Code Identification
The Code identification offers you the possibility, to
determine an already entered code.
5.4.1 Press the SETUP key un
permanently lit.
5.4.2 Select the device you want to control using
the device key (e.g. TV). A successful selection
is indicated by the LED with one flash follo-
wed by permanent light.
5.4.3 Press SETUP key. The LED indicator flashes
once followed by permanent light.
5.4.4 To find the first digit, press the numeric keys
from 0 to 9. The LED indicator flashes once
to indicate the first digit of the 4-digit code
number.
5.4.5 Repeat step 5.4.4 for the second, third and
fourth digit.
il the LED indicator is
CODES
6. Special Functions
6.1 Punch Through Channel
The Punch Through Channel allows the PROG+ or
PROG- commands to bypass the currently controlled
device and switch the channels on a second device.
All other commands remain uninfluenced.
To activate the punch through channel setting:
+ Press desired device mode key (e.g. TV).
* Press and hold "PROG+" key.
+ Press desired ddevice mode key (e.g. SAT).
+ Release "PROG+" (the indicator flashes once if the
setting is activated).
To deactivate the punch through channel setting:
+ Press desired device mode key (e.g. TV).
+ Press and hold "PROG-, key.
* Press desired device Mode Key (e.g. SAT).
Release "PROG-" (the indicator flashes twice if the
setting is deactivated).
6.2. Punch Through Volume
The Punch Through Volume allows the VOL+ or VOL-
commands to bypass the currently controlled device
and adjust the volume on a second device. All other
commands remain uninfluenced.
To activate the punch through volume setting:
+ Press desired device mode key (e.g. TV).
Press and hold "VOL+" key.
Press desired device mode key (e.g. SAT).
Release "VOL+" (the indicator flashes once if the
setting is activated).
To deactivate the punch through volume setting:
* Press desired device mode key (e.g. TV).
* Press and hold "VOL-" key.
* Press desired device mode key (e.g. SAT).
+ Release "VOL-" (the indicator flashes twice if the
setting is deactivated).
6.3. MACRO POWER
Macro Power enables you to turn two A/V devices on/
off simultaneously.
To activate the macro power setting:
+ Press desired device mode key (e.g. TV).
* Press and hold "POWER" key.
* Press desired device mode key (e.g. SAT).
setting is activated).
To deactivate the macro power setting:
Press desired device mode key (e.g. TV).
Press and hold "POWER" key.
Press desired device mode key (e.g. SAT).
Release "POWER " (the indicator flashes twice if
he setting is deactivated).
Release "POWER" (the indicator flashes once if the
®
05.04.12 10:2