Werbung
NOTES
ON
SCHEMATIC
DIAGRAM
1. Resistance
without
unit
indication
is given
in ohms:
resistance
with
''K''
indication
refers
to
kiloohms;
and
resistance with "'M" indication means megohms. The rating
is 1/4W (watt) unless otherwise specified. Parts with "FU"
indication are parts which may melt down.
. Capacitor without unit indication is expressed in the unit of
LF
(microfarads),
and that with
''p'' mark
means
pico-
farads.
""ML''
menas
mylar, while
all others
are ceramic
Capacitors.
. Electrolytic capacitor is specified
in terms of capacitance
(uF)/withstand voltage (V).
4.
5.
ANMERKUNGEN
ZUM
SCHEMATISCHEN
SCHALTPLAN
1. Wiederstande ohne Einheitsangabe sind in Ohm angegeben;
Wiederstande mit der Bezeichnung ''K"' sind in Kiloohm und
Wiederstande mit der Bezeichnung ''M"' in Megaohm angege-
ben.
Falls nicht anders
angegeben, betragt der Nennwert
1/4 W. Mit "FU" bezeichnete Teile konnen abschmelzen.
Fur Elektrolytkondensatoren
ist der Ausdruck
''Kapazitat
(uF )/Stehspannung (V)'' angegeben.
Capacitance (uF)/tension supportée (V).
CAUTION
If any one of the nylon bands shown in the Figure 11-1 is once
removed
for some reason, be sure to reprise it to the original
place in the same appearance as before.
PRECAUTION
4.
i
numérique sans appliquer de signal.
Nylon
band
LHLDWIO7S5AF ZZ
Figure 11-1
Abbildung 11-1
AC supply cord
Netzkabel
Cordon d'alimentation
de secteur
QACCBO0054AF09
QACCLO052AFZZ
QACCV0001AGZZ
QACCZ0002 TAOF
QACCZ0053AF00
Caution label on
the polyethylene bag
(TCAUZ0039AFZZ)
pecung nod: {Lett oie)
(SPAKA0773AFZZ)
Packing Case
;
(SPAKC1791AFZZ)
Bushing
Tulle
Garniture
LBSHCO002AGZZ
LBSHCO007AFZZ
LBSHCO004AGZZ
LBSHC0007AFZZ
LBSHCO007AFZZ
Connection
Anschlufi
Connexion
Figure
Abbildung
Figure
Brown
Braun
Marron
Black
Schwarz
Noir
White stripe
Weifstreifen
Bande blanche
Light blue
Hellblau
Bleu clair
Brown
Braun
Marron
Brown
Braun
Marron
Brown
Braun
Marron
Black
Schwarz
Noir
Black
Schwarz
Noir
Polyethylene bag to contain printed matters.
| 1, Warranty Card (TGANE1117AFZz)
|
_
4. Polyethylene Bag (SSAKA0024AFZZ)
Packing Procedure
2: Operation Manual (TINSMOOS0AFZ2)
Setting positions of every switch and knob.
3. Schematic Diagram (TMAPCO804AFZZ)
1. The power switch is set at OFF
position.
2. The bass, treble and balance control knobs
are set at center position.
3. The tape monitor
switch
is set at OFF
position.
4. The function selector switches are set at
Label (MADE IN JAPAN) ,
(TLABJOOOGAFZZ)
- (TCAUZO039AFZZ)
The mono switch is set at OFF position.
. The loudness switch
is set at OFF
posi-
tion.
7. The volume
control
knob is set at mini-
mum position.
Oo
Polyethylene Bag
~~ (SSAKH0018SEZZ)
~~
(SPAKAO774AF zz)
2399.
Werbung
