Troubleshooting; Technical Information - SOLIS ULTRA X-PRESS 8326 Bedienungsanleitung

s TRO UBL E SH O OT ING
Problem Possible cause
The button – Short circuit. The line voltage
does not light is insufficient, please mind
up after the the statements given on the
blender jug has type plate.
been placed on
– Power failure.
the motor base
and the power
plug has been
plugged in.
The appliance – Too much food in the blen-
suddenly stops der jug: The motor was over-
during a blen- loaded and has switched off.
ding program
– Excessive use has triggered
and „ERR" might
the overheat protection of
light up in the
the motor.
display.
– Too much solid or hard food
has been filled into the blen-
der jug in one go, triggering
the overload protection of
the motor.
– You have touched multiple
buttons at the same time, not
clearly defining the desired
function.
110
Solution
– Plug the power plug into a
suitable power outlet and start
the appliance again.
– Wait for the power supply to
be restored.
– Take some of the food out of
the blender jug and start the
appliance again.
– Pull the power plug and then
let the motor cool down for
20 minutes. Then, start using
the appliance again.
– Take some of the food out of
the blender jug and start the
appliance again.
– Never touch two or more but-
tons at the same time. Pull the
power plug, reconnect it and
restart the appliance.
s TE CHNI C AL I NFOR MATI ON
Modell no. JT-609, type 8326
Product High Speed Blender
Voltage/frequency
220–240V~ / 50/60Hz
Power 1000 Watt
Dimensions (W x H x D) approx. 22,0 x 46,5 x 27,0 cm
Weight approx. 5,05 kg
Technical modifications reserved.
AC C ES S OR Y F OR Y OUR SOL IS U LTR A X- PR ES S
n
Art.-no. Article
720.08 Blender jug (500 ml) with normal lid and turning lid and silicone spatula
For your Solis Ultra X-Press blender the supply is available from good specialist
retailers or from Solis of Switzerland Ltd.
Telephone +41 848 804 884, Telefax: +41 848 804 890,
email: info.ch@solis.com or www.solis.ch
(shipping only within Switzerland)
111