Control Panel Description - SOLIS ULTRA X-PRESS 8326 Bedienungsanleitung

s CONTROL PANEL DESCRIPTION
Blending time display with
Countdown function
Once you plug the power plug into the power outlet and switch the appliance on
with the button, the following symbols at the touch sensitive sensor buttons
light up:
ON/OFF button
Time button „+ 20 seconds"
Smoothie button
Ice cream button
Vegetable/fruit juice button
Soup button
Nut button
Pulse button
96
Speed button bar
s THE FUNCTIONS OF YOUR
SOLIS ULTRA X-PRESS BLENDER
You can choose from 5 automatic programs, 8 speed settings, one Pulse function
and a time function „+ 20 seconds". The function is activated by briefly touching
the corresponding sensor button, the according program lights up in the control
panel resp. all other selectable functions, which can be chosen additionally to this
program, light up. Once a program is completed, a signal sounds five times and
the appliance switches off automatically. Only the Pulse button
for as long as the Pulse function should be active. Once the Pulse button
longer touched, the Pulse function stops. No signal sounds after the Pulse function
is ended.
ON/OFF button
• With the ON/OFF button, you can switch the appliance on and off.
• When the symbol constantly lights up, the appliance is in standby mode.
• When the symbol flashes, the appliance is in operation mode and one of
the functions can be selected and started.
• With the ON/OFF button, you can stop the appliance at any time, regardless of
the function currently activated.
Pulse button
• The Pulse function can be activated by touching the Pulse button. The Pulse
function is activated for as long as you touch the Pulse button. The blender
blends at short intervals with high revolutions per minutes. The time display
indicates for how many seconds the Pulse function has been active. Please note
that the maximum time for using the Pulse function without interruption is
30 seconds.
• While the Pulse function is switched on, the ON/OFF button
all other buttons on the control panels are out, indicating that they can not be
used simultaneously. When you release the Pulse button, all other buttons light
up again, the ON/OFF button
0:00.
• Notes:
The Pulse function can only be activated when no other program has been
activated and should be used in short intervals.
No signals sound upon termination of the Pulse function.
We recommend not activating the Pulse function for too long.
has to be held
flashes while
flashes and the display goes back to stating
is no
97