Using Your Induction Hob; To Start Cooking; When You Have Finished Cooking - Hoover HI642CBB Bedienungsanleitung

Using your Induction Hob

To start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then
•
go out, indicating that the hob has entered the state of standby mode.
1. Touch the ON/OFF
show "– "
2. Place a suitable pan on the cooking zone that you
wish to use.
Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
3. Touching the heating zone selection control, and an
indicator next to the key will flash
4. Select a heat setting by touching the "-" or "+"
control.
If you don't choose a heat setting within 1
•
minute, the Induction hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.

When you have finished cooking

1. Touching the heating zone selection that you wish to
switch off
2. Turn the cooking zone off by scrolling down to"0".
switch. all the indicators
12
8