Herunterladen Diese Seite drucken

Beemoo RAISE Bedienungsanleitung Seite 4

Verfügbare Sprachen

BUCKLE UP WITH ISOFIX + 3-POINT SAFETY BELT

1. Adjust the length of the safety belt guide hook. The shoulder belt of the car safety

belt must pass through the guide hook and the top of the armrest, and the waist belt

must pass through the guide groove.

2. Let the child sit in the car seat and adjust the length of the safety belt guide hook

according to the child's height.

3. Pull out the car three-point safety belt, the shoulder belt of the safety belt passes

through the guide hook and the top of the armrest, the abdominal belt of the safety

belt passes through the guide grooves on both sides of the car seat, and is fixed to

the car buckle, and you hear "Click" sound to ensure that the buckle is firmly locked.

4. Recycle and tighten the car seat belt and adjust the tightness of the car seat belt

according to the size of the child, and it must not be turned over or twisted. Please

make sure that the position of the seat belt waistband is as low as possible, so that

the child's pelvis can be better fixed.

Click

INSTALLATION 3-POINT SAFETY BELT

Applicable to vehicles equipped with ISOFIX system that meets the requirements of

ECE R14.

1. Ensure that the ISOFIX connector of the car seat is retracted into the base and

place the car seat on both sides of the rear row.

2. Let the child sit on the car seat and adjust the length of the safety belt guide hook