Troubleshooting - Fohhn AIREA-SERIES ABX-4 Bedienungsanleitung

4. tROuBlEshOOtIng

ABx-4
pROBlEm
No leds are lit.
there is no sound.
If your problem does not appear in the above lists, or it is not solved using any of the suggestions made in the list, please contact us at
the address on the last page of this manual.
sERVIcIng And REpAIRs
Servicing and/or repairs should only be carried out by qualified personnel – trained by FOhhn
Do not carry out any servicing or repairs on this device other than the basic maintenance activities described in the
"Maintenance" section of this manual.
To find a FOhhn Service centre in your area, please contact us at the address on the last page of this manual.
®
Keep the packaging that has been supplied with this device so that, in the event of any damage, it can be returned in its
original packaging. This will reduce the risk of any further damage occurring during transportation.
pOssIBlE cAusE
no power available
No signal source is connected.
cable defect
Aes/ebu wrongly connected
tRouBlEShootIng | eNglIsH
pOssIBlE ActIOn
No action needed: the ABx-4 is a passive de-
vice.
Connect a signal source to the AIREA mAstER.
Check the rJ-45 cable going
AIREA mAstER.
Check that the rJ-45 cable is connected to the
output of the AIREA mAstER.
.
®
19
to the