Controls, Connections And Displays - Fohhn AIREA-SERIES ABX-4 Bedienungsanleitung

3.3 cOntROls, cOnnEctIOns And
dIsplAys
FROnt
(1) AIREA-nEt Input
the AIREA-nEt cable coming from the AIREA mAstERs is
plugged in here.
(2) FOhhn-nEt Output
this output carries the FOhhn-nEt control signals.
(3) dIgItAl AudIO Output (AEs/EBu)
this output is for digital audio signals.
AdVIcE:
If an AIREA-nEt output is only connected to an AIREA
mAstER module via an ABx-4, the power output will not
be routed through to the AIREA mAstER (the AIREA-
nEt-lOAd will be 0 W). Consequently, the red signal LED
will be lit on the AIREA mAstER.
However, the digital audio signals and FOhhn-nEt con-
trol signals can still be accessed at any time on the respec-
tive ABx-4 outputs.
BAck
1
ABout thE pRoDuct | eNglIsH
2 3
16