VOLTCRAFT SEM6000 DUAL Bedienungsanleitung Seite 20

Intended use
The product acts as a power socket and is equipped with a push
button that turns the power supply to attached loads on and off.
The product has bi-directional functionality. You can connect a
consumer (example: space heater) or connect a suitable energy
source to backfeed electricity (example: solar panel). The product
automatically detects which function you are using.
An accompanying app controls the product (on/off, timer, sched-
ule) and displays recorded data. Product and app communicate
via Bluetooth 4.0.
The product is intended only for the connection to a standard pow-
er socket with earth contact. Refer to the technical data section to
learn more about the maximum permissible load.
The product is only designed for indoor use. Keep away from wa-
ter and high-humidity sources and the areas where these condi-
tions occur (e.g. bathroom).
Please read the operating instructions carefully and do not discard
them. If you pass the product on to a third party, please hand over
these operating instructions as well.
Any use other than that described above could lead to damage
to this product and involves the risk of short circuits, fire, electric
shock, etc. No part of the product may be modified or reconfig-
ured! Please observe the safety instructions at all times!
20